FAN COIL UNIT

UNIT CASING

Top cover material, base material, side panel material, back cover, top cover for plenum, side cover for plenum and plenum box are manufacture powder coated Single Skin Galvanized Steel, Galvanized iron, Stainless Steel. Casing is internally lined with 6mm closed cell elastomeric foam insulation
Options:
Double skin FCU with Casing made of 0.8mm Galvanized Steel, Galvanized iron with 15 mm puff injected.

COOLING COIL:

Fabricated from copper tubes hydraulic bonded pressure at 2000 psig with aluminum fins and are leak tested at 350 PSIG nitrogen pressure.

Copper Pipe Tube OD : 3/8”, ½”
Fin Pitch: 10-14 FPI
Fin Thickness: 0.15 mm
Fins Type: Zig Zag Pattern with Louvered

BLOWER:

Fans are forward cured centrifugal type of double inlet, statically and dynamically balanced to ensure quiet operation.

Type: DIDW Forward cured centrifugal fan
Material: Galvanized steel

MOTOR:

Fans are forward cured centrifugal type of double inlet, statically and dynamically balanced to ensure quiet operation.

Type: single phase/ three phase capacitor type
Safety: Flame proof and non-flame proof
PROTECTION GRADE: IP20
Insulation: B
Power- 220-240/50 Hz

AIR FILTER:

All units are provided with 25 mm Aluminum Mesh filter as a standard option. Filters accessible from rear end of the unit and is easily removable by pulling out from unit frame.

Filter frame - Aluminum alloy
Thickness: 25 mm
EU-2 FILTER GRADE AS PER EN779

DRAIN TRAY:

They are fabricated from heavy gauge galvanized steel and are insulated to prevent condensation. Powder coated on both side as per RAL 9002.

Material: Galvanized steel
Thickness: 0.8 mm
Insulation material: PE,3 mm
Powder coated as per RAL 9002

STANDARD FEATURES:

Extra Low Noise Due To Lower Rpm With Larger Dia Fan Wheels
Statically And Dynamically Balanced Forward Cured Centrifugal
Most Compact Design With Only 251 mm Height Across The Range
Blue Fin Coated Coils To Withstand Corrosive Climates
Simple Design With Easy Service Ability

OPTIONAL FEATURE:

Back or Bottom Surface Plenum With Filter
3 Row/ 4 Row Cooling Coil
100 mm or 200 mm Extended Insulated Drain Pan In GI/SS
External Static Pressure of 0,3,6 and 8 mm of WG